A proactive process risk assessment approach based on job hazard analysis and resilient engineering

Complex systems often experience a long period of incubation before accidents occur. Therefore, a proactive risk assessment is essential for process safety. The conventional job hazard analysis (JHA) method has been an effective tool to conduct a process risk assessment in the high-risk industrial field. However, the conventional JHA is inadequate for the proactive risk assessment since it is usually conducted during and before one specific operation process. Operations such as startup and maintenance are performed repeatedly on the lifecycle of a plant. Therefore, the risk reduction measures for the industrial process should include not only preventive actions obtained from the conventional JHA but also recovery ones. Resilience engineering (RE) has proven to be helpful for the recovery analysis of a complex system. The objective of this paper is to propose a proactive and comprehensive process risk assessment approach based on JHA and RE. The mechanism of applying RE to address operation process risk is illustrated. The integrated approach can provide guidelines to establish proactive risk reduction measures as well as maintain a low-risk level. Finally, a gas transmission startup process risk assessment case is presented to demonstrate its applicability.     

Toward harmonizing prospective effectiveness assessment for road safety: Comparing tools in standard test case simulations

Abstract

Objective: With the overall goal to harmonize prospective effectiveness assessment of active safety systems, the specific objective of this study is to identify and evaluate sources of variation in virtual precrash simulations and to suggest topics for harmonization resulting in increased comparability and thus trustworthiness of virtual simulation-based prospective effectiveness assessment.

Methods: A round-robin assessment of the effectiveness of advanced driver assistance systems was performed using an array of state-of-the-art virtual simulation tools on a set of standard test cases. The results were analyzed to examine reasons for deviations in order to identify and assess aspects that need to be harmonized and standardized. Deviations between results calculated by independent engineering teams using their own tools should be minimized if the research question is precisely formulated regarding input data, models, and postprocessing steps.

Results: Two groups of sources of variations were identified; one group (mostly related to the implementation of the system under test) can be eliminated by using a more accurately formulated research question, whereas the other group highlights further harmonization needs because it addresses specific differences in simulation tool setups. Time-to-collision calculations, vehicle dynamics, especially braking behavior, and hit-point position specification were found to be the main sources of variation.

Conclusions: The study identified variations that can arise from the use of different simulation setups in assessment of the effectiveness of active safety systems. The research presented is a first of its kind and provides significant input to the overall goal of harmonization by identifying specific items for standardization. Future activities aim at further specification of methods for prospective assessments of the effectiveness of active safety, which will enhance comparability and trustworthiness in this kind of studies and thus contribute to increased traffic safety.     

基于双指标多等级的土壤重金属生态风险评价

采用土壤中重金属的全量和有效态双重指标,建立基于多等级综合评估的土壤中重金属生态风险评价模型,将联合概率曲线法引入土壤评价模型,分析重金属暴露浓度与毒性数据的概率分布,考察重金属对土壤生物的毒害程度,从而确定土壤中重金属对于生态系统的风险。建立从简单到复杂的多等级综合评价方法,表征重金属的污染等级、浓度效应、多种重金属污染物的协同效应、不同重金属的毒性效应和土壤对不同重金属污染物的敏感性。选择典型地区采集有代表性的土壤样品,测定不同重金属的总量和有效态,验证评价模型的实用性和评价分级的合理性。旨在解决土壤重金属风险评价的方法学问题,为土壤环境质量管理提供支持。     

Exposure assessment of operators to pesticides in Kongou,a sub-watershed of Niger River valley

The use of pesticides in horticultural sector in Niger has become an integral part of modern agriculture. Nevertheless, their inappropriate use can generate negative health effects to operators. A study was carried out among Kongou farmers in order to assess their potential dermal exposure (PDE). The UK-POEM model was used to quantify the PDE during mixing/loading and application according to the local practices. In order to determine which parts of the operator body are subject to most contamination during spraying and to validate the theoretical model used, a patch method was used with a tartrazine dye. The deposits of the tartrazine on patches were measured by colorimetry thanks to the absorbance value determined after their extraction in water and a calibration curve. A total of ten spraying trials (five trials with the hand-held sprayer and five others with the backpack sprayer) were performed by different producers at 0.5 and 1 m height for each trial. The survey shows that 92% of the farmers are illiterate and the most common active substances identified are organophosphate or pyrethroids insecticides. Seventy percent of operators do not use any personal protective equipment (PPE) during mixing/loading or spraying. The predictive systemic exposure levels vary from 0.0027?mg kg^?1 bw per day to 0.7692?mg kg^?1 bw per day for backpack sprayer and from 0.0261?mg kg^?1 bw per day to 0.9788?mg kg^?1 bw per day for hand-held sprayer, several times higher the Acceptable Operator Exposure Level (AOEL) for some actives substances. Theoretical modeling indicates more exposure of operator by a hand-held sprayer than a backpack sprayer. The patch method results show that the deposits of dye increase when the position of sprayer nozzle increases from 0.5 to 1 m for the two sprayers. All parts of the operator body are contaminated but lower body parts and chest are the most exposed. The patch method results also show that hand spraying contaminates operator more than backpack spraying, confirming the results of the theoretical model.     

工业废水毒性评估与致毒物质鉴别技术进展

综述了工业废水毒性的化学评估方法、生物毒性评估方法、毒性鉴定评估(TIE)程序以及效应引导的毒物鉴别分析(EDA)中污染物提取、分离、毒性测试、致毒物质识别等技术。指出,工业废水毒害风险评估方法正逐渐向化学分析与生物毒性测试相结合的关键致毒物质鉴别方法转变,便捷、高通量是致毒物质鉴别技术的发展方向,质谱技术及替代定性监测技术的发展将提供更为准确、便捷的致毒物质鉴别方法,为工业废水潜在风险防控提供依据。     

The ethics of genetic engineering and gene drives in conservation

The ethical issues associated with using genetic engineering and gene drives in conservation are typically described as consisting of risk assessment and management, public engagement and acceptance, opportunity costs, risk and benefit distributions, and oversight. These are important, but the ethical concerns extend beyond them because the use of genetic engineering has the potential to significantly alter the practices, concepts, and value commitments of conservation. I sought to elucidate the broader set of ethical issues connected with a potential genetic engineering turn in conservation and provide an approach to ethical analysis of novel conservation technologies. The primary rationales offered in support of using genetic engineering and gene drives in conservation are efficiency and necessity for achieving conservation goals. The instrumentalist ethical perspective associated with these rationales involves assessing novel technologies as a means to accomplish desired ends. For powerful emerging technologies the instrumentalist perspective needs to be complemented by a form-of-life perspective frequently applied in the philosophy of technology. The form-of-life perspective involves considering how novel technologies restructure the activities into which they are introduced. When the form-of-life perspective is applied to creative genetic engineering in conservation, it brings into focus a set of ethical issues, such as those associated with power, meaning, relationships, and values, that are not captured by the instrumentalist perspective. It also illuminates why the use of gene drives in conservation is so ethically and philosophically interesting.     

官厅水库入库断面水质多指标评价与演变特征分析

水体质量状况及其污染特征是流域水污染防治规划和治理措施制定的前提和基础。采用主成分分析和层次聚类分析等多元统计分析方法,选取溶解氧、高锰酸盐指数、化学需氧量等10个不同类型的监测指标,综合评价了官厅水库入库断面八号桥2006—2017年丰水期和枯水期水质年际变化特征,识别了不同阶段关键污染指标。结果表明:各年份丰水期(9月)大多数水质指标均优于枯水期(5月),特别是粪大肠菌群和氨氮,但总磷和高锰酸盐指数的差异较小。根据水质指标年际变化情况,可将研究期分为污染严重阶段(2006—2007年)、污染改善阶段(2008—2015年)和污染全面好转阶段(2016—2017年)。大部分水质指标呈现逐年好转的趋势,特别是粪大肠菌群、氨氮和五日生化需氧量,但总磷仍是官厅水库入库河流的重要污染指标。     

某矿低铜废石综合回收利用项目职业病危害预评价

为了对某矿业有限公司低铜废石综合回收利用项目可能产生的职业病危害因素进行辨识、分析和评价，采用检查表、类比法相结合的原则对该项目的铲装、破碎、运输、筑堆等工艺进行分析评价，并利用经验法对浸出、萃取电积工艺进行分析评价。结果表明:类比工程中绝大部分粉尘、噪声检测点的浓（强）度符合国家标准；化学毒物、工频电场接触浓（强）度符合国家标准；电积车间的通风满足要求；萃取车间的事故通风能力不足。评价方法及通风计算方法对同类项目具有借鉴意义。     

A risk reduction approach for academic research labs: A case study on naphthenic corrosion

Academic research and development (R&D) labs are a significant part of academic life. But there can be physical, environmental, and experiment quality risks associated to this activity. Academic labs can present specific experiments, which have associated risks for researchers. Academic labs are also characterized by a high turnover of students and many of them are not fully aware of the level of physical and environmental risks of their activity. Accidents in academic labs with injuries and loss of life are facts that have to be tackled through risk management approaches. The objective of this paper is to present an integrated management approach, tackling risk management and analysis methods. HAZOP (Hazard and Operability Study) and PFMEA (Process Failure Mode and Effects Analysis) enabled, respectively, the analysis of safety and environmental risks. By quantifying the level of risk according to the type of experiment and the research context, it is possible to provide safety to the system. The resulting Digital Poka-Yoke – a mistake-proofing approach – has brought about the desired quality of results in experiments. The proposed approach was validated through a case study monitoring naphthenic corrosion experiments conducted by the Lab of Surface Electrochemistry and Corrosion (LSEC) at the Federal University of Paraná (UFPR). As a consequence, this approach is currently in use at this lab.     

Factors affecting the quantitative uncertainty of the estimated short-term intake. Part I—Calculation methods

ABSTRACT

The calculation of the combined uncertainty of the international estimated short-term intake (IESTI) of ethephon residues in apples is shown as an example. The ethephon residues in apples were reported by the Joint FAO (Food and Agriculture Organization of the United Nations)/WHO (World Health Organization) Meeting on Pesticide Residues (JMPR). The apple consumption data were taken from the IESTI (international short-term intake) calculation template used by the JMPR. The IESTI was calculated with the currently used method (case 2a) and a proposed one recommended by the EFSA (European Food Safety Authority)/RIVM (Dutch National Institute for Public Health) Scientific Workshop co-sponsored by FAO and WHO. In this example, the ratio of IESTI_proposed/IESTI_current and their combined relative uncertainty are about 2.8, and 1.7, respectively. The larger IESTI and uncertainty obtained with the proposed equation are the consequence of calculation only with the large portion (LP) instead of its combination with unit mass, and the MRL instead of the highest residue (HR). The LP is the major contributor to the combined uncertainty. Both the calculated IESTI and its combined uncertainty depend on the actual food – pesticide residue combination, and should be calculated for each case.